The conversation doesn't end at the show floor.
The conversations at Futurebuild don't have to end with the event. Pick up where the stand left off – with the facade range, the projects and the people behind the work.
The conversations at Futurebuild don't have to end with the event. The Fielders post-event insight pack pulls together the profile data, project work and technical reference from the stand. Have it on hand for the next time it's needed.
There is more to Fielders®
The facade range. Built for the work ahead.
Prominence®
Express-joint walling with the elegance of a flat pan and the rigour of full cyclonic testing.
Wide, flat-pan walling with concealed fixings and a refined finish. Available in multiple pan widths and suited to vertical or horizontal installation. Tested for both cyclonic and non-cyclonic regions, it is a profile specifiers and builders continue to reach for.
There's more to Fielders than the corrugated profile on a heritage cottage or the bold facade on a commercial build.
The work didn't stop at the stand. The facade range. Projects from across the country. The Design Solutions Group, who work alongside architects and specifiers on facade projects at any stage.
Some of it is on this page. There is more to see at the stand.
Each profile solves a different problem. Some give you flat, expressed-joint planes. Others curve, ripple or run long. All are made from COLORBOND® steel and tested for Australian conditions. The cards below give you the start of the story. For the samples, the detailing and the technical conversations, talk to the team.
Boulevard®
Sharp-lined facade panel with a recessed-joint look and European-engineered interlocking detail.
Express-joint wall cladding with European
engineering behind it. Interlocking panels create a clean recessed-joint look across vertical or horizontal runs. The most versatile profile in the Finesse® range, suited to high-end commercial and residential facades.
Standing-seam steel with a curving capacity that opens up forms most profiles cannot.
Grandeur®
Standing-seam cladding with a curving capacity most profiles cannot match. Smooth-curves to a 1.5 metre radius in steel, with sliding clips that allow sheet lengths up to 24 metres. For projects
where geometry is part of the brief.
Australia’s most familiar corrugated profile, available curved, flat, vertical or horizontal.
S-Rib™
The corrugated profile. Equally at home on heritage restorations and contemporary facades, in vertical, horizontal or curved applications. Available in 0.35, 0.42, 0.48 and 0.60 millimetre BMT for spring-curving down to a 450 millimetre radius.
Trapezoidal rib-and-pan profile delivering economical large-format coverage on roofs and walls.
A trapezoidal rib-and-pan profile with 762 millimetre cover and a 28 millimetre rib height. Quick to install and suitable for roof pitches as low as two degrees. Economical across large facade or roofing runs without compromising on finish.
TL-5™
Structural V-profile cladding delivering long unsupported spans across roofs and facades.
Deep V-shaped structural cladding with the span to reach where other profiles cannot. Made from COLORBOND® steel at 800 millimetre cover width, with the capacity to span up to 20 metres without intermediate purlins or girts.
ARAMAX®
Built. Specified. Standing
Newman Health Service Facility, WA
A regional health service in Newman, Western Australia, defined by an angular roofline and a textured, multicoloured facade. Prominence® and Boulevard® were specified in standard and custom pan depths, set in a recurring vertical pattern with every third line standing proud to create depth. A complex installation that demanded precision across 15 months of work.
Silver Thomas Hanley Architecture
Fielders Prominence® and Boulevard® walling
Three projects. Three sets of constraints. Three architects who chose Fielders to deliver against the brief. From a community sports facility in Adelaide to a regional health service in Western Australia, these projects show what the facade range looks like when it leaves the catalogue and enters the field.
Modbury Sports Club, SA
A community sports facility in South Australia where Boulevard® was specified for its bold linear expression and clean architectural lines. Wide flat pans and expressed ribs introduce shadow definition and depth across the facade, with the COLORBOND® steel external skin keeping ongoing maintenance low for a high-traffic civic building.
Walter Brooke
Fielders Boulevard® walling and DECKFORM® steel decking
UTAS The Shed, TAS
A landmark health and science facility at the University of Tasmania's Inveresk Precinct, where ARAMAX® Aluminium was specified to realise an ambitious twin-shed form inspired by the site's industrial heritage. Over 5,500 m² of perforated roofing and cladding deliver a cohesive, sculptural façade while supporting the project's low-carbon sustainability benchmarks.
A facade looks simple on the elevation. The detailing behind it is rarely so.
Our Design Solutions Group works alongside architects, designers and structural specifiers on facade projects at any stage. Our team is ready to have conversations about how a profile behaves at scale, how it interacts with substructure and membranes, and the questions that come up along the way.
For facade projects, that means access to people who understand how each profile performs at scale, how it interacts with substructure and membranes, and how to detail the corners, penetrations and meeting points that never show up in the rendered image.
The team behind every spec
The science supporting the steel
Every Fielders facade product is developed and tested in a NATA accredited facility before it reaches a project site. Wind, water, structural load and fire performance are all assessed against Australian Standards, with published data you can specify against. This is the work that sits behind every profile. Watch the Research and Technology team at work.
- In-house testing facility, NATA-accredited with verifiable performance data published for
every profile. - Comprehensive testing across wind, water, structural and fire performance to Australian
Standards and NCC requirements. - Specification stage data available before procurement decisions are locked in.
- Ongoing development informed by real world project feedback and field performance.
Key benefits
The rest is a conversation away.
This page is just the start. The samples, the detailing and the technical conversations are where the work really happens. Fill in your details and a member of the Fielders Design Solutions Group will be in touch to pick up where the stand left off.
